Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
1. REMOVE ROD BUSHING
Using SST, remove the rod bushing from the connecting rod.
SST 09222-30010
2. INSTALL NEW ROD BUSHING
Using SST, install the rod bushing to the connecting rod.
SST 09222-30010
NOTE: Align the bushing oil hole with the connecting rod oil hole.
3. HONE NEW BUSHING AND CHECK PIN FIT IN CONNECTING ROD
(a) Hone the new bushing and check that the oil clearance is within standard specification.
Standard clearance: 0.005 -0.01 1 mm (0.0002 - 0.0004 in.)
(b) Check the pin fit at normal room temperature. Coat the pin with engine oil and push the pin into the rod with thumb pressure.