Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
Dashboard / Instrument Panel: Service and Repair
REMOVAL OF SAFETY PAD
1. DISCONNECT BATTERY CABLE FROM NEGATIVE TERMINAL
2. REMOVE STEERING WHEEL
3. REMOVE STEERING COLUMN COVER
4. REMOVE INSTRUMENT PANEL NO.1 UNDER COVER
(a) Remove the two screws and engine hood release lever.
(b) Remove the lower register.
(c) Remove the four screws and under cover.
(d) Remove the No.2 heater to register duct.
5. REMOVE INSTRUMENT LOWER FINISH PANEL
(a) Pull out the lower finish panel.
(b) Disconnect the connectors from the switches.
6. REMOVE INSTRUMENT CENTER CLUSTER FINISH PANEL