Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
/Page-468001.png)
Fuel Pressure Release: Service and Repair
FUEL PRESSURE RELEASE
-
Disconnect the battery negative cable.
-
Place a suitable container or shop towel under the cold start injector.
-
Disconnect the wiring connector from the cold start injector.
7M-GE
7M-GTE
-
Slowly loosen the union bolt of the cold start injector tube.
-
After fuel pressure is released, re-tighten union bolt.
Torque union bolts to 19 - 25 ft.lbs. (2.5 - 3.5 kg.m)
-
Wipe off any splattered gasoline.
-
Reconnect the battery negative (-) cable.
