Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
/Page-499001.png)
Fuel Pump Ballast Resistor: Testing and Inspection
INSPECTION OF PUMP RELAY AND RESISTOR
1. INSPECT OF FUEL PUMP RELAY.
NOTE: The relay is located in the left cowl side of engine compartment.
Inspect Relay Continuity
a. Using an ohmmeter, check that there is continuity between terminals +B and FP.
b. Check that there is continuity between terminals + B and FPR.
c. Check that there is no continuity between terminals +B and PR.
If continuity is not as specified, replace the relay.
Inspect Relay Operation
