Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
(d) Turn the crankshaft again approximately 100 to 400 clockwise so that the timing belt cover TOC mark and the crankshaft pulley TDC mark are
aligned.
4. REMOVE NO.4 AIR CLEANER PIPE WITH NO.1 AND NO.2 AIR CLEANER HOSES
5. REMOVE NO.7 AIR CLEANER HOSE WITH AIR FLOW METER AND AIR CLEANER CAP
(a) Disconnect the three air hoses and PCV hose.
(b) Disconnect the air flow meter connector.
(c) Disconnect the PS idle up air hose.
(d) Loosen the clamps and remove the bolt.
(e) Remove the No.7 air cleaner hose with air flow meter and air cleaner cap.
6. REMOVE PS RESERVOIR TANK
Remove the two bolts, nut and reservoir tank with bracket.