Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
/Page-368002.png)
(7M-GE)
7M-GE
a. Disconnect the wiring connector from the cold start injector.
b. Place a suitable container or shop towel under the cold start injector tube.
c. Slowly loosen the union bolt of the cold start injector tube and remove the bolt and two gaskets from the delivery pipe.
(7M-GTE)
a. Place a suitable container or shop towel under the cold start injector.
7M-GTE
b. Slowly loosen the union bolt the cold start injector tube and remove the bolt and two gaskets from the cold Start injector.
c. Remove the union bolt, fuel tube and gaskets.
