Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
/Page-791001.png)
Neutral Safety Switch: Adjustments
INSPECT NEUTRAL START SWITCH
Check that the engine can be started with the shift lever only in the N or P position, but not in other positions.
If not as stated above, carry out the following adjustment procedures.
a. Loosen the neutral start switch bolt and set the shift lever to the N range.
b. Align the groove and neutral basic line.
c. Hold in position and tighten the bolt.
Torque: 130 kg.cm (9 ft.lb, 13 N.m)
