Supra L6-3.0L DOHC Turbo (7M-GTE) (1987)
4. WHEN REPLACING SOLENOID
a. Disconnect the connector from the solenoid.
b. Remove the solenoid mounting bolt.
c. Remove the solenoid.
5. REMOVE OIL STRAINER
CAUTION: Be careful as some fluid will come out with the oil strainer.
Remove the three bolts, oil strainer and gasket.
6. REMOVE THE TWO OIL TUBES
Pry up both tube ends with a large screwdriver and remove the two tubes.
7. DISCONNECT THE THREE CONNECTORS FROM EACH SOLENOID
8. REMOVE VALVE BODY