Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
(g) Install the two oil seals to the camshafts.
(h) Clean the installed surfaces of the No.1 bearing cap and cylinder head with cleaner.
(i) Apply seal packing part No. 08826-00080, or equivalent, to the No.1 bearing cap as shown.
(j) Install the No.1, No.2, No.4, No.5 and No.6 bearing caps in their proper locations.
(k) Apply a light coat of engine oil on the threads and under the heads of the bearing cap bolts.
(l) Install and uniformly tighten the 14 bearing cap bolts on one side, in several passes, in the sequence shown, to 20 Nm (200 kg. cm, 14 ft. lbs.).
