Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
(b) Remove the pulley bolt.
(c) Using pulley set SST No. 09950-50010, or equivalent, remove the pulley
13. Remove the five No.1 timing belt cover bolts, then the cover and gasket.
14. Remove timing belt guide.
15. Remove timing belt.
NOTE: When re-using timing belt, draw an arrow on the timing belt in the direction of engine revolution, and place matchmarks on the timing
belt and crankshaft timing pulley.
16. Using a ten mm hexagon wrench, remove the idler pulley pivot bolt, plate washer and then the pulley.
17. Remove crankshaft timing pulley as follows:
(a) Remove the bolt and timing belt plate.
(b) Remove the crankshaft timing pulley.
NOTE:
^
If the pulley cannot be removed by hand, use SST puller set to remove the crankshaft timing pulley.
^
Do not scratch the sensor part the crankshaft timing pulley.
