Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
(c) Install the timing belt on the crankshaft timing pulley and idler pulley.
NOTE: When re-using a timing belt, align the match marks of the crankshaft timing pulley and timing belt made at removal, and install the
belt with the arrow pointing in the direction of engine revolution.
4. Install the timing belt guide, facing the cup side outward.
5. Install No.1 Timing belt cover.
6. Install crankshaft pulley as follows:
(a) Align the pulley set key with the key groove of the pulley, and slide on the pulley.
(b) Using companion flange holder Special Service Tool (SST) No. 09330-00021 with 09213-70010, or equivalent, install the bolt and tighten to
324 Nm (3,300 kg. cm., 239 ft. lbs.).
7. On models with Automatic Transmission (A/T), connect oil cooler tubes.
8. Install camshaft timing pulleys as follows:
(a) Align the camshaft knock pin with the groove of the pulley, and slide on the timing pulley.
(b) Install the timing pulley bolts hand tight.