toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Oil Cooler, Engine|Specifications|Page 2014 > < Oil Cooler, Engine|Specifications|Page 2012
Page 1
background image

Oil Cooler: Service and Repair

REMOVAL

1. Disconnect Power Steering (PS) oil reservoir without disconnecting hoses as follows:

(a) Disconnect the two clamps of the engine wire protector from the bracket.

(b) Remove the three bolts and disconnect the reservoir.

2. Drain engine coolant.
3. Remove oil filter.
4. Disconnect water bypass hoses from oil cooler.
5. Remove oil cooler as follows:

(a) Remove the relief valve, plate washer and oil cooler.
(b) Remove the two O-rings from the oil cooler.

Oil Cooler, Engine|Specifications|Page 2014 > < Oil Cooler, Engine|Specifications|Page 2012