toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Condenser HVAC|Testing and Inspection|Page 7566 > < Condenser HVAC|Testing and Inspection
Page 1
background image

Condenser HVAC: Service and Repair

CONDENSER REMOVAL

1. DISCHARGE REFRIGERANT IN REFRIGERATION SYSTEM

INSTALLATION HINT:  Evacuate air from refrigeration system.
See: Service and Repair/Discharging & Evacuating System

Charge system with refrigerant and inspect for leakage of refrigerant.
See: Service and Repair/Charging the System

Specified amount:

700 ± 50 g (24.96 ± 1.76 oz.)

2. REMOVE BATTERY

3. REMOVE AIR CLEANER DUCT

Remove the bolt and the air cleaner duct.

4. REMOVE AIR CLEANER

a. Remove the air cleaner cover.
b. Remove the air cleaner hose.
c. Remove the No. 1 air hose. 
d. Remove the 3 bolts and 2 screws.
e. Remove the air cleaner.

5. REMOVE No.5 AIR HOSE CLAMP

a. Remove the 2 bolts and clamp.
b. Push the hose to engine side.

6. REMOVE THESE PARTS:

a. Front bumper
b. Radiator support upper seal
c. Receiver and holder

Condenser HVAC|Testing and Inspection|Page 7566 > < Condenser HVAC|Testing and Inspection