Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
7. REMOVE LIQUID TUBE AND DISCHARGE TUBE
Torque: 10 N.m (100 kgf.cm, 7 ft.lbf)
REMOVAL NOTE: Cap the open fittings immediately to keep moisture or dirt out of the system.
INSTALLATION HINT: Lubricate 3 new O-rings with compressor oil and install the tubes.
8. REMOVE CONDENSER
a. Remove the 2 radiator upper mountings.
b. Push the radiator toward engine.
c. Remove the condenser upper mountings.
d. Push the condenser toward radiator and remove the liquid tube piping clamp.
Torque: 4.1 N.m (42 kgf.cm, 36 in.lbf)
