toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Turn Signal Switch > < Combination Switch|Diagrams|Page 9683
Page 1
background image

Turn Signal Flasher: Testing and Inspection

TURN SIGNAL FLASHER INSPECTION

INSPECT FLASHER OPERATION

1. Connect the terminal 2 to battery positive (+) terminal and the terminal 3 to battery negative (-) terminal.
2. Connect the 2 turn signal light bulbs parallel to each other to terminals 1 and 3, check that the bulbs flash.

HINT:  The turn signal lights should flash between 60 and 120 times per minute.

If operation is not as specified, replace the flasher.

Turn Signal Switch > < Combination Switch|Diagrams|Page 9683