Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
Camber: -0°30' ± 45' (-0.5° ± 0.75°)
Left-Right Error: 30' (0.5°) or less
Caster: 3°30' ± 45' (3.5° ± 0.75°)
Left-Right Error: 30'(0.5°) or less
SAI (reference): 9°45' ± 45' (9.75° ± 0.75°)
If the steering axis inclination is not within the specification, after camber and caster have been correctly adjusted, recheck the steering knuckle
and front wheel for bearing or looseness.
4. Inspect toe-in.
Measuring Point Reference
Toe-in (total):
A + B: 0°00' ± 12' (0° ± 0.2°)
C - D: 0 ± 2 mm (0 ± 0.08 inch).
If toe-in is not within specification, adjust by the tie rod end.
5. Adjust camber and caster, as follows:
a. Remove the engine under cover.
b. Remove the nut, two bolts and the lower arm bracket stay.
c. Loosen the front and/or rear adjusting cam nuts.
d. Adjust the camber and caster by front and/or rear adjusting cams.
NOTE: Try to adjust the camber and caster to the center value.
e. Torque the front and/or rear adjusting cam nuts.
Torque: 226 Nm (166 ft. lbs.)
f.
Install the lower arm bracket stay.
