Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
Engine Oil: Service and Repair
WARNING:
^
Prolonged and repeated contact with mineral oil will result in the removal of natural fats from the skin, leading to dryness, irritation and
dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
^
Exercise caution in order to minimize the length and frequency of contact of your skin to used oil. Wear protective clothing and gloves.
Wash your skin thoroughly with soap and water, or use water-less hand cleaner, to remove any used engine oil. Do not use gasoline,
thinners, or solvents.
CAUTION: In order to preserve the environment, used oil and used oil filters must be disposed of only at designated disposal sites.
1. Remove the oil filler cap.
2. Remove the oil drain plug, and drain the oil into a suitable container.
3. Using oil filter wrench Special Service Tool (SST) No. 09228-07501, or equivalent, remove the oil filter.
4. Check and clean the oil filter installation surface.
5. Apply clean engine oil to the gasket of a new oil filter.
6. Lightly screw the oil filter into place, and tighten it until the gasket contacts the seat.
7. Using SST oil filter wrench, tighten it an additional 3/4 turn.
