Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
7. Remove the three drive belt tensioner bolt, then the tensioner.
8. Set No.1 cylinder to TDC/compression as follows:
(a) Turn the crankshaft pulley, and align its groove with timing mark -0- of the No.1 timing belt cover.
NOTE: Always turn the crankshaft clockwise.
(b) Check that the timing marks of the camshaft timing pulleys are aligned with the timing marks of the No.4 timing belt cover.
-
If not, turn the crankshaft 1 revolution (360°).
9. Remove timing belt from camshaft timing pulleys as follows:
NOTE: When re-using timing belt, place matchmarks on the timing belt and camshaft timing pulleys as shown in the illustration.