Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
Engine RPM Sensor (NE signal): Service and Repair
COMPONENTS FOR REMOVAL AND INSTALLATION
CRANKSHAFT POSITION SENSOR REMOVAL
1. REMOVE GENERATOR
2. DISCONNECT CRANKSHAFT POSITION SENSOR CONNECTOR
(a) Disconnect the sensor connector from the bracket.
(b) Disconnect the sensor connector from the wiring connector.
3. REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the wire clamp from the cylinder block.