toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Exhaust Gas Recirculation > < Evaporative Emission Control Canister|Testing and Inspection
Page 2
background image

(c) Blow air (4.71 kPa (0.048 kgf/cm, 0.68 psi)) into port B, and check that air does not flow from the other ports.

If operation is not as specified, replace the charcoal canister.

4. CLEAN FILTER IN CANISTER

Clean the filter by blowing 294 kPa (3 kgf/sq.cm, 43 psi) of compressed air into port C while holding port A and B closed.

NOTICE:
-

Do not attempt to wash the canister.

-

No activated carbon should come out.

5. REINSTALL CHARCOAL CANISTER

Exhaust Gas Recirculation > < Evaporative Emission Control Canister|Testing and Inspection