Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
Throttle Position Sensor: Description and Operation
Throttle Position Sensor
CIRCUIT DESCRIPTION
The throttle position sensor is mounted in the throttle body and detects the throttle valve opening angle. When the throttle valve is fully closed, the
IDL1 contacts in the throttle position sensor are on, so the voltage at the terminal IDL1 of the ECM becomes 0 V. At this time, a voltage of
approximately 0.7 V is applied to terminal VTA1 of the ECM. When the throttle valve is opened, the IDL1 contacts go off and thus the power
source voltage of approximately 12 V in the ECM is applied to the terminal IDL1 of the ECM. The voltage applied to the terminal VTA1 of the
ECM increases in proportion to the opening angle of the throttle valve and becomes approximately 3.2 ~ 4.9 V when the throttle valve is fully
opened. The ECM judges the vehicle driving conditions from these signals input from terminals VTA1 and IDL1 and uses them as one of the
conditions for deciding the air-fuel ratio correction, power increases correction and fuel-cut control etc.
