Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
Camshaft Position Sensor: Service and Repair
COMPONENTS FOR REMOVAL AND INSTALLATION
CAMSHAFT POSITION SENSOR REMOVAL
1. DISCONNECT IAC VALVE CONNECTOR
2. DISCONNECT AIR HOSE FROM IAC VALVE
3. REMOVE ENGINE HANGER
Remove the 2 bolts, ground strap and engine hanger.
Torque: 39 N.m (400 kgf.cm, 29 ft.lbf)
4. DISCONNECT CAMSHAFT POSITION SENSOR CONNECTORS
5. REMOVE CAMSHAFT POSITION SENSORS Remove the 4 bolts, 2 camshaft position sensors and 2 gaskets.
Torque: 8.8 N.m (90 kgf.cm, 78 in.lbf)
CAMSHAFT POSITION SENSOR INSTALLATION
INSTALLATION HINT: Installation is in the reverse order of removal.
