Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
(b) Using SST, remove the knock sensor. SST 09816-30010
4. INSPECT KNOCK SENSORS
Using an ohmmeter, check that there is no continuity between the terminal and body.
If there is continuity. replace the sensor.
5. REINSTALL KNOCK SENSORS
(a) Using SST, install the knock sensor. SST 09816-30010
Torque: 44 N.m (450 kgf.cm, 33 ft.lbf)
(b) Connect the knock sensor connector.
6. REINSTALL STARTER (See starter installation in Starting)
7. REINSTALL THROTTLE BODY
