toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Transmission Control Systems > < Electrode Gap Specification|Page 4757
Page 2
background image

5. INSPECT ELECTRODE GAP

Maximum electrode gap for used spark plug:
1.3 mm (0.051 in.)
 

Correct electrode gap for new spark plug:
1.1 mm (0.043 in.)
 

NOTICE: If adjusting the gap of a new spark plug, bend only the base of the ground electrode. Do not touch the tip. Never attempt to adjust the
gap on the used plug.

6. CLEAN SPARK PLUGS

If the electrode has traces of wet carbon, allow it to dry and then clean with a spark plug cleaner.

Air pressure: Below 588 kPa (6 kgf/sq.cm, 85 psi) 

Duration: 20 seconds or less 

HINT: If there are traces of oil, remove it with gasoline before using the spark plug cleaner.

7. REINSTALL SPARK PLUGS

Torque: 18 N.m (180 kgf.cm, 13 ft.lbf) 

8. REINSTALL IGNITION COILS ASSEMBLIES

Transmission Control Systems > < Electrode Gap Specification|Page 4757