Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
(b) Remove the 2 nuts and ECM protector.
4. REMOVE ECM
(a) Remove the nut and disconnect the ECM from the floor panel.
(b) Fully loosen the bolt and disconnect the 2 ECM connectors and remove the ECM.
ECM INSTALLATION
1. REINSTALL ECM
(a) Connect the 2 ECM connectors.
-
Match the male connector correctly with the female connector, then press them together.
-
Tighten the bolt.
Make sure the connector is completely connected by tightening the bolt until there is a clearance of less than 1 mm (0.04 in.) between the
bottom of the male connector and the end of the female connector.
