toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 3114 > < Component Tests and General Diagnostics|Page 3112
Page 1
background image

Knock Sensor: Oscilloscope Patterns and Waveforms

Reference INSPECTION USING OSCILLOSCOPE 

-

With the engine racing (4,000 rpm) measure waveform between terminals KNK1, KNK2 of ECM and body ground.

HINT: The correct waveform is as shown.

-

Spread the time on the horizontal axis and confirm that period of the wave is 123 m sec. (Normal mode vibration frequency of knock sensor:
8.1 KHz).

HINT: If normal mode vibration frequency is not 8.1 KHz, the sensor is malfunctioning.

Component Tests and General Diagnostics|Page 3114 > < Component Tests and General Diagnostics|Page 3112