Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
Park/Neutral Position Switch: Service and Repair
REPLACEMENT
1. Remove front exhaust pipe.
2. Disconnect park/neutral position switch connector.
3. Remove park/neutral position switch.
a. Remove the control shaft lever.
b. Pry off the lock washer and remove the nut.
c. Remove the bolt and pull out the park/neutral position switch.
4. Install and adjust park/neutral position.
5. Switch connect park/neutral position switch connector.
6. Install front exhaust pipe.
