Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
Right
a. Measure the length of the lower suspension arm No. 1 and No. 2, as shown in the illustration.
Length: (E - F) or (F - E) should be less than 4.0 mm (0.16 inch). If not, adjust the length of the arms by turning the adjusting cam as shown,
until (E - F) or (F - E) is less than 4.0 mm (0.16 inch).
b. Measure the camber and toe-in. If the camber and toe-in are still not within the specification, adjust the camber and toe-in with the adjusting
cam.
c. Remove the bolt and disconnect the parking brake cable bracket.
d. Loosen and adjust the No. 1 and/or No. 2 cams.
e. Adjust camber and toe-in by turning the No. 1 and/or No. 2 cams.
NOTE: Try to adjust the camber and toe-in to the center value.
f.
Torque the No. 1 and/or No. 2 cam nuts.
Torque: 184 Nm (134 ft. lbs.).
g. Connect the parking brake cable bracket with the bolt.
