Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
c. Remove the O-ring from the housing.
12. Remove control valve assembly. Using a plastic hammer, tap out and remove the control valve.
NOTICE: Be careful not to damage the oil seal lip.
13. Remove cylinder end stopper and two spacers. Using snap ring pliers, remove the snap ring from the rack housing.
14. Remove steering rack and oil seal, as follows:
a. Using an extension bar or brass bar and a press, press out the rack with the oil seal.
NOTICE: Take care not to drop the rack.
b. Remove the oil seal from the rack.
15. Remove oil seal and spacer. Using SST 09950 - 60010 (09951 - 00280), 09950 - 70010 (09951 - 07200) or equivalent, press out and remove the
oil seal and spacer.
ASSEMBLY
NOTICE: When using a vise, do not overtighten it.
1. Coat with power steering fluid or molybdenum disulfide lithium base grease.
2. Install spacer and oil seal, as follows:
a. Coat a new oil seal lip with power steering fluid.
