Supra Liftback L6-2997cc 3.0L DOHC MFI Twin-Turbo (1997)
Flex Plate: Testing and Inspection
DRIVE PLATE INSPECTION
1. Measure drive plate runout and inspect ring gear. Set up a dial indicator, measure the drive plate runout.
Maximum runout: 0.20 mm (0.0079 inch)
-
If the runout is not within the specification, replace the drive plate.
-
If installing a new drive plate, note the orientation of spacers and tighten the bolts.
Torque to: 83 N.m (61 ft. lbs.)
