toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 7364 > < Diagram Information and Instructions|Page 7362
Page 2
background image

^

Fade Out
Because FM radio waves are of higher frequencies than AM radio waves, they bounce off buildings, mountains, and other obstructions. For
this reason, FM signals often seem to gradually disappear or fade away as the vehicle goes behind a building or other obstructions. This is
called "fade out".

4. COMPACT DISC PLAYER

Compact Disc (hereafter called "CD") Players use a laser beam pick-up to read the digital signals recorded on the CD and reproduce analog
signals of the music, etc. There are 4.7 in. (12 cm) and 3.2 in. (8 cm) discs in the CD player.

HINT:  Never attempt to disassemble or oil any part of the player unit. Do not insert any object other than a disc into the magazine.

5. Tape Player/Head Cleaning:

MAINTENANCE

a. Raise the cassette door with your finger. Next, using a pencil or similar object, push in the guide.
b. Using a cleaning pen or cotton applicator soaked in cleaner, clean the head surface, pinch rollers and capstans.

6. CD Player/Disc Cleaning:

MAINTENANCE

If the disc gets dirty, clean the disc by wiping the surface from the center to outside in the radial directions with a soft cloth.

NOTE:  Do not use a conventional record cleaner or anti-static preservative.

7. ANTI-THEFT SYSTEM

HINT:  The words "ANTI-THEFT SYSTEM" are displayed on the cassette tape slot cover.

a. Setting system

The system is in operation once the customer has pushed the required buttons and entered the customer-selected 3-digit ID number.

Diagram Information and Instructions|Page 7364 > < Diagram Information and Instructions|Page 7362