Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
Brake Master Cylinder: Service and Repair
Removal and Installation
REMOVAL
1. Disconnect level warning switch connector.
2. Draw out fluid with syringe.
NOTICE: Do not let brake fluid remain on a painted surface. Wash it off immediately.
3. Disconnect brake lines.
Using Special Service Tool (SST) 09023-00100 or equivalent, disconnect the brake lines from the master cylinder.
Torque: 15 Nm (11 ft. lbs.)
4. Remove master cylinder.
a. Remove the 2 nuts.
Torque: 13 Nm (9 ft. lbs.)
