toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brake Master Cylinder > < Diagram Information and Instructions|Page 6032
Page 2
background image

Torque: 15 Nm (11 ft. lbs.) 

2. Disconnect connectors.

Disconnect the 2 connectors and wire harness clamp from the bracket.

3. Remove ABS actuator assembly.

Remove the bolt, 2 nuts and ABS actuator assembly.

Torque: 19 Nm (14 ft. lbs.) 

4. Remove ABS actuator.

a. Remove the 2 nuts and actuator from bracket.

Torque: 5.4 Nm (48 inch lbs.) 

b. Remove the 2 cushion bolts and 3 cushions.

INSTALLATION 

Installation is in the reverse order of removal.
1. After installation, fill brake reservoir with brake fluid and bleed brake system.
2. Check for leaks.

Brake Master Cylinder > < Diagram Information and Instructions|Page 6032