toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Coolant Temperature Sensor/Switch (For Computer) > < With Auto A/C
Page 1
background image

Coolant Temperature Sensor / Switch HVAC: Service and Repair
With Manual A/C

REMOVAL

1. REMOVE ENGINE UNDER COVER
2. DRAIN ENGINE COOLANT

HINT:  It is not necessary to drain out all coolant.

3. REMOVE SWITCH

a. Disconnect the connector.
b. Remove the switch.

Torque: 7.4 N.m (75 kgf.cm, 65 in.lbf) 

HINT:  At the time of installation, please refer to the following item Lubricate a new O-ring with soapy water and install the switch

INSTALLATION

Installation is in the reverse order of removal.

Coolant Temperature Sensor/Switch (For Computer) > < With Auto A/C