toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Engine Oil Pressure|Specifications|Page 1819 > < Engine Oil Pressure|Specifications
Page 1
background image

Engine Oil Pressure: Testing and Inspection

INSPECTION

1. CHECK OIL QUALITY

Check the oil for deterioration, entry of water, discoloring or thinning.
If oil quality is visibly poor, replace the oil.

Oil grade (2JZ-GE): 

API grade SH Energy-Conserving II or SJ, Energy Conserving or ILSAC multigrade engine oil.
SAE 5W-30 is the best choice for your vehicle, for good fuel economy, and good starting in cold weather.

Oil grade (2JZ-GTE):

API grade SH Energy-Conserving II or SJ, Energy-Conserving or ILSAC multigrade engine oil. 
Recommended viscosity is as shown in the illustration.

2. CHECK ENGINE OIL LEVEL

After warming up the engine and then 5 minutes after the engine stop, oil level should be between the low level and full level marks on the
dipstick.
If low, check for leakage and add oil up to full level mark.

NOTICE:  Do not fill with engine oil above the full level mark.

3. REMOVE ENGINE UNDER COVER
4. 2JZ-GTE: DISCONNECT POWER STEERING OIL RESERVOIR WITHOUT DISCONNECTING HOSES

a. Disconnect the 2 clamps of the engine wire protector from the bracket

b. Remove the 3 bolts and disconnect the reservoir.

Engine Oil Pressure|Specifications|Page 1819 > < Engine Oil Pressure|Specifications