toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Oil Filter, Engine|Service and Repair|Page 1831 > < Oil Filter, Engine|Service and Repair
Page 2
background image

3. REFILL WITH ENGINE OIL

a. To wipe off oil that has dripped onto the engine under cover, remove the 4 screws and bend the under cover downward.

NOTICE:
-

To avoid damaging the silencer, do not bend the engine under cover more than 150 mm (5.91 inch).

-

If oil gets on the silencer, wipe it off with a dry rag.

b. Clean and install the oil drain plug with a new gasket.

Torque: 38 Nm (27 ft. lbs.) 

c. Fill with fresh engine oil.

d. Reinstall the oil filler cap.

4. START ENGINE AND CHECK FOR OIL LEAKS
5. RECHECK ENGINE OIL LEVEL

Oil Filter, Engine|Service and Repair|Page 1831 > < Oil Filter, Engine|Service and Repair