Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
5. REMOVE OIL PRESSURE SWITCH, AND INSTALL OIL PRESSURE GAUGE
a. Disconnect the oil pressure switch connector.
b. Using Special Service Tool (SST), remove the oil pressure switch
SST 09810 - 30010
c. Install an oil pressure gauge.
6. WARM UP ENGINE
Allow the engine to warm up to normal operating temperature.
7. CHECK OIL PRESSURE
Oil pressure:
At idle 49 kPa (7 psi) or more
At 3,000 rpm 324 kPa (47 psi) or more
8. REMOVE OIL PRESSURE GAUGE AND REINSTALL OIL PRESSURE SWITCH
a. Remove the oil pressure gauge.
b. Tighten the union bolt.
Torque: 90 Nm (66 ft. lbs.)
c. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833 - 00080, THREE BOND 1344, LOCTITE 242 or equivalent
d. Using SST, install the oil pressure switch.
SST 09810 - 30010
Torque: 15 Nm (11 ft. lbs.)
e. Connect the oil pressure switch connector.
9. DISCONNECT POWER STEERING OIL RESERVOIR WITH HOSES
10. START ENGINE AND CHECK FOR LEAKS
11. REINSTALL ENGINE UNDER COVER