toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Coolant Temperature Sensor / Switch HVAC|Service and Repair > < Control Module HVAC|Service and Repair
Page 1
background image

Coolant Temperature Sensor / Switch HVAC: Testing and Inspection

INSPECT ECT SWITCH CONTINUITY

a. Using an ohmmeter, check the no continuity exists between the terminals when the coolant temperature is a above 100 °C (212 °F).

If there is continuity, replace the switch.

b. Using an ohmmeter, check the continuity exists between the terminals when the coolant temperature is below 91 °C (196 °F).

If there is no continuity, replace the switch.

Coolant Temperature Sensor / Switch HVAC|Service and Repair > < Control Module HVAC|Service and Repair