Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
Left-Right Error: 30' (0.5°) or less.
Caster: 3°20' ± 45' (3.33° ± 0.75°).
Left-Right Error: 30' (0.5°) or less.
Steering axis inclination:
Reference: 9°35' ± 45' (9.58° ± 0.75°).
With Turbo (2JZ-GTE):
Camber: -0°30' ± 45' (-0.5° ± 0.75°).
Left-Right Error: 30' (0.5°) or less.
Caster: 3°30' ± 45' (3.5° ± 0.75°).
Left-Right Error: 30' (0.5°) or less.
Steering axis inclination:
Reference: 9°45' ± 45' (9.75° ± 0.75°).
If the steering axis inclination is not within the specification, after camber and caster have been correctly adjusted, recheck the steering knuckle
and front wheel for bearing or looseness.
Measuring Point Reference
4. Inspect toe-in.
Toe-in (total):
A + B: 0° ± 12' (0° ± 0.2°).
C - D: 0 ± 2 mm (0 ± 0.08 inch).
If toe-in is not within specification, adjust by the tie rod end.
5. Adjust camber and caster.
a. Remove the engine under cover.
b. Remove the nut, two bolts and the lower arm bracket stay.
c. Loosen the front and/or rear adjusting cam nuts.
d. Adjust the camber and caster by front and/or rear adjusting cams.
NOTE: Try to adjust the camber and caster to the center value.
e. Torque the front and/or rear adjusting cam nuts.
