toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Timing Belt Removal|Page 1488 > < Timing Belt Removal|Page 1486
Page 5
background image

18. REMOVE CRANKSHAFT PULLEY

Using SST, remove the crankshaft pulley.
SST 09950 - 50010 (09951 - 05010, 09552 - 05010, 09553 - 05010, 09553 - 05010, 09553 - 05020, 09554 - 05030)

NOTICE:  Do not turn the crankshaft pulley.

19. REMOVE NO.1 TIMING BELT COVER

Remove the 5 bolts, timing belt cover and gasket.

20. REMOVE TIMING BELT GUIDE

21. REMOVE TIMING BELT 

HINT: 
(When re-using timing belt): Draw an arrow on the timing belt in the direction of engine revolution, and place matchmarks on the timing belt and
crankshaft timing pulley.

22. REMOVE IDLER PULLEY 

Using a 10 mm hexagon wrench, remove the pivot bolt, plate washer and idler pulley. 

23. REMOVE CRANKSHAFT TIMING PULLEY 

a. Remove the bolt and timing belt plate.

b. Remove the crankshaft timing pulley. If the pulley cannot be removed by hand, use SST to remove the crankshaft timing pulley. 

SST 09950 - 50010 (09951 - 05010, 09952 - 05010, 09953 - 05010, 09953 - 05010,09953 - 05020, 09954 - 05010)

Timing Belt Removal|Page 1488 > < Timing Belt Removal|Page 1486