Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
b. Check that each pulley aligns with the timing marks as shown in the illustration.
If the marks do not align, remove the timing belt and reinstall it.
17. TIGHTEN CRANKSHAFT PULLEY BOLT
Using SST, install the pulley bolt.
SST 09213 - 70010, 09330 - 00021
Torque: 330 Nm (243 ft. lbs.)
18. INSTALL DRIVE BELT TENSIONER
Install the tensioner with the 3 bolts.
Torque: 21 Nm (15 ft. lbs.)
NOTICE: Be careful not to drop the bolts inside the timing belt cover.
19. INSTALL NO.2 TIMING BELT COVER
a. Install the gasket on the timing belt cover.
b. Using a 5 mm hexagon wrench, install the timing belt cover with the 3 bolts.
Torque: 8.0 Nm (71 inch lbs.)
20. INSTALL NO.3 TIMING BELT COVER
a. Install the gasket on the timing belt cover.
b. Using a 5 mm hexagon wrench, install the timing belt cover with the 4 bolts.
Torque: 8.0 Nm (71 inch lbs.)
c. Install the oil filler cap.
21. INSTALL POWER STEERING PUMP AND FRONT BRACKET
a. Temporarily install the vane pump to the bracket.
b. Install the plate washer and front bracket with the 3 bolts.
