toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fuel Pressure Regulator|Diagrams|Page 3819 > < Fuel Pressure Regulator|Diagrams|Page 3817
Page 1
background image

Fuel Pressure Regulator: Service and Repair

REMOVAL 

CAUTION:  Do not smoke or work near an open flame when working on the fuel pump.

1. TAKE OUT FLOOR CARPET
2. REMOVE SPARE WHEEL COVER
3. REMOVE SPARE WHEEL
4. REMOVE SERVICE HOLE COVER
5. REMOVE FUEL PUMP AND SENDER GAUGE ASSEMBLY

(a) Disconnect these connector and hoses from the fuel pump bracket:

(1) Fuel pump connector
(2) Ground connector
(3) Fuel outlet hose

Remove the union bolt and 2 gaskets, and disconnect the outlet hose.

(4) Fuel breather hose

(b) Remove the retainer clamp.

(c) Using SST, loosen the retainer. SST 09808-14010
(d) Remove the retainer, the fuel pump, sender gauge assembly and gasket.

6. REMOVE FUEL PUMP ASSEMBLY FROM FUEL TANK
7. REMOVE LEAD WIRE FOR FUEL PUMP
8. DISCONNECT GROUND STRAP FROM FUEL PUMP CLAMP
9. REMOVE FUEL PUMP FROM FUEL PUMP BRACKET

(a) Pull out the lower side of the fuel pump from the pump bracket.
(b) Disconnect the fuel pump with fuel hose from the fuel pressure regulator, and remove the fuel pump.

10. REMOVE FUEL FILTER AND FUEL PRESSURE REGULATOR FROM FUEL PUMP BRACKET

Pull off the fuel filter and fuel pressure regulator from the main pipe.

11. REMOVE FUEL FILTER FROM FUEL PRESSURE REGULATOR

(a) Remove the screw, and Pull out the fuel filter from fuel pressure regulator.

Fuel Pressure Regulator|Diagrams|Page 3819 > < Fuel Pressure Regulator|Diagrams|Page 3817