toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Ignition System > < ACIS Control Valve <--> [Variable Induction Control Valve]|Testing and Inspection|Page 4001
Page 2
background image

(f) Remove the 5 bolts, 2 nuts, air intake chamber and 2 gaskets.

HINT:  At the time of installation, please refer to the following items. Use 2 new gaskets.

Torque: 28 N.m (280 kgf.cm, 21 ft.lbf) 

(g) Remove the bolt and accelerator cable clamp.

4. REMOVE VACUUM CONTROL VALVE SET

5. REMOVE VSV FROM VACUUM TANK

(a) Disconnect the vacuum hose from port A of the vacuum tank.
(b) Remove the screw and VSV.

INSTALLATION  

Installation is in the reverse order of removal.

Ignition System > < ACIS Control Valve <--> [Variable Induction Control Valve]|Testing and Inspection|Page 4001