Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
NOTICE: At the time of tightening the screw, as the sensor itself tends to turn causing to slanting, check that it is within the standard
value after having finished the torque.
(5) Fully close the throttle valve with a screwdriver and check that the value of the throttle valve opening percentage (THROTTLE POS) of
the CURRENT DATA stays with the standard value.
Standard throttle valve opening percentage: 10 - 14%
If the throttle valve opening percentage is not as specified, repeat steps (4) through (5).
(6) Paint the sensor set screws.
(7) Turn the ignition switch OFF.
(8) Disconnect the TOYOTA hand-held tester or OBD II scan tool from the DLC3.
(9) Disconnect the throttle position sensor connector
