toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Relays and Modules - Ignition System > < EFI Main Relay <--> [Main Relay (Computer/Fuel System)]|Locations|Page 274
Page 1
background image

EFI Main Relay: Testing and Inspection

INSPECTION 

1. REMOVE EFI MAIN RELAY

2. INSPECT EFI MAIN RELAY CONTINUITY

(a) Using an ohmmeter, check that there is continuity between terminals 1 and 2.

If there is no continuity, replace the relay.

(b) Check that there is no continuity between terminals 3 and 5.

If there is continuity, replace the relay.

3. INSPECT EFI MAIN RELAY OPERATION

(a) Apply battery positive voltage across terminals 1 and 2.
(b) Using an ohmmeter, check that there is continuity between terminals 3 and 5.

If there is no continuity, replace the relay.

4. REINSTALL EFI MAIN RELAY

Relays and Modules - Ignition System > < EFI Main Relay <--> [Main Relay (Computer/Fuel System)]|Locations|Page 274