Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
Accelerator Pedal Position Sensor: Initial Inspection and Diagnostic Overview
INSPECTION
INSPECT ACCELERATOR PEDAL POSITION SENSOR
(a) Disconnect the accelerator pedal position sensor connector.
(b) Using an ohmmeter, measure the resistance between terminal VC and E2.
Resistance: 1.2-3.2 K ohms at 20°C (68°F)
If the resistance is not as specified, replace the accelerator pedal position sensor.
(c) Reconnect the accelerator pedal position sensor connector.