Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
b. Place the voltage regulator and brush holder on the rectifier end frame.
NOTE: Be careful of the holder installation direction.
c. Install the 5 screws.
Torque: 2.0 N.m (20 kgf.cm, 18 in.lbf)
d. Place the brush holder cover on the brush holder.
8. INSTALL REAR END COVER
a. Install the end cover and plate terminal with the bolt and 3 nuts.
Torque:
Nut 4.4 N.m (45 kgf.cm, 39 in.lbf)
Bolt 3.9 N.m (40 kgf.cm, 35 in.lbf)
b. Install the terminal insulator with the nut.
Torque: 6.5 N.m (67 kgf.cm, 58 in.lbf)
9. CHECK THAT ROTOR ROTATES SMOOTHLY
