toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

N.1 and No.2 Speed Sensor|Page 4853 > < N.1 and No.2 Speed Sensor|Page 4851
Page 2
background image

5. REMOVE REAR SUPPORT MEMBER

a. Remove the 4 nuts.
b. Remove the 4 bolts and support member.

6. REMOVE TRANSMISSION MOUNTING BRACKET

Remove the 4 bolts and bracket from the transmission.

7. REMOVE EXTENSION HOUSING

Remove the 6 bolts. If necessary, tap the extension housing with a plastic hammer or block of wood to loosen it.

8. REMOVE SENSOR ROTOR

a. Using a snap ring expander, remove the snap ring.
b. Remove the sensor rotor and key.

9. INSTALL SENSOR ROTOR AND KEY

a. Install the key and sensor rotor.
b. Using a snap ring expander, install a new snap ring.

N.1 and No.2 Speed Sensor|Page 4853 > < N.1 and No.2 Speed Sensor|Page 4851