toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal and Replacement Procedures|Page 5063 > < Removal and Replacement Procedures
Page 2
background image

4. EXAMINE PARTICLES IN PAN 

Remove the magnets and use them to collect any steel chips. Look carefully at the chips and particles in the pan and the magnet to anticipate what
type of wear you will find in the transmission. 
-

Steel (magnetic): bearing, gear and plate wear 

-

Brass (non-magnetic): bushing wear

5. REMOVE OIL STRAINER

Remove the 3 bolts and oil strainer from the valve body.

6. REMOVE SOLENOID WIRING

a. Remove the 2 bolts and clamp.

b. Remove the 2 set bolts of the clamp and disconnect the ATF Temp. sensor.

Removal and Replacement Procedures|Page 5063 > < Removal and Replacement Procedures