toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal and Replacement Procedures|Page 5066 > < Removal and Replacement Procedures|Page 5064
Page 5
background image

c. Install and torque the 18 bolts.

Bolt length:

A bolt: 28.6 mm (1.13 inch)
B bolt: 33.6 mm (1.32 inch)
C bolt: 41.6 mm (1.64 inch)

Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)

12. INSTALL SOLENOID WIRING 

a. Connect the 5 connectors to the solenoid.

b. Set the ATF Temp. sensor.
c. Install and torque the 2 set bolts of the clamp.

Torque: 6.6 Nm (68 kgf-cm, 58 inch lbs.)

d. Install the clamp.
e. Install and torque the 2 bolts.

Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)

Removal and Replacement Procedures|Page 5066 > < Removal and Replacement Procedures|Page 5064